Download this software to begin a free 30-day trial of the Inspired XPress software, which allows the creation of templates and content. The content can be previewed within the software as it would play out on an Inspired XPress SPX-1000 player. Once the 30-day trial has expired, a license will need to be purchased to continue using the software. If you have already purchased an SPX-1000 player, you can download this software and enter the license key that was included in the shipment of your device.

To install the IS XPress software on your PC, complete the following steps:

1. Download the latest version (.EXE file)
2. Double-click the .EXE file to start the installation wizard
3. Follow the instructions to the end of the installation: standard choices should fit most needs
   Note: Some anti-virus software detects the mplayer.exe component of the software as being a generic Trojan. This is a false positive and you may safely proceed with the install. If this component is not installed, audio and video streaming within the software will not work.
4. Launch AMX Inspired Signage XPress from the desktop icon or the start menu

Once installed, the software can be activated as a 30-day trial or with a valid license key. If you have not received a license key, you probably need to purchase one. Contact your AMX Dealer to order a valid license.

If you want to evaluate the software, simply click the 30-day trial button. If you have purchased a license, click 'Enter Product Key' and type the key to register your product.

After installation, visit www.ThinkInspiredSignage.com and view the 'How To Videos' to learn how to use the IS XPress software and then download some 'Sample Projects' to get started right away.

PLEASE NOTE: Due to potential issues with license validation, Inspired Signage XPress software should NOT be installed on a virtual machine.

PC Requirements

• Operating Systems: IS XPress will operate on Windows XP, Vista and Windows 7 PCs that support DirectX 9.0c and SSE2 instructions
• Processor: For best performance, AMX recommends a minimum of a Pentium D processor with separate graphics card
• Languages Supported: English, French, German, Italian, Japanese, Portuguese, simplified Chinese
• Installation Instructions: Programming Guide - IS-SPX-1000 Inspired Signage XPress Player

Updating Software From a Previous Version:

• Run the IS-XPress-2.1.2 installation program.
• Please note that your projects, devices and the license file are not lost during this procedure.

• Added - Dynamic USB drive detection
• Added - Ability to open *.pps files when double-clicked
• Fixed - Count number of open presentations
• Fixed - Speaker text was not displaying some characters correctly on touch panel

• Today's Events, New Event, Rename event in i!-ScheduleTest3(640x480).tpd
• Month reverts to previous month when editing day for fixed date
• Do not allow renaming to an empty string
• Rename using current event name
• Calendar initialization for G4/G3 Web Control
• Dynamic samples (2&3) multi-panel event add/delete
• Dynamic sample (3) keyboard initialization

• Panel refresh command, 'REFRESH'
• Default start and end times
• NetLinx Studio workspace (apw)

Application Download only operates in Demo Mode
(Fully functional version is distributed on a CD (NSS-PFRAME FG3002-05).)

• Supports all versions of G4 firmware, Modero and TPI4
• Device-Port-System is now displayed correctly in Panel Links window
• Panel Links may be added with panel off-line

• Updated AMX Computer Control to be based on RealVNC server 4.1.1
• Fixed problems with password authentication failing on certain system dates

For a G4 ComputerControl USB Stick, these files should be copied to the root directory of the stick.

For a TakeNote USB Stick, these files should be copied to the "Computer Control" folder on the stick.

Virtual Keypad provides cost-effective remote management, maintenance and simple system interaction for systems that require remote access or that have simple control requirements.

New Features:

• Apple iPhone/iPod Touch interface

The AMX Product Information (AMX-PI) application allows you to view detailed technical/firmware information for AMX Hardware and Software products.

New Features:

• Added updates for the following products:
• Enova DVX-2100HD-SP
• RMS Codecrafter
• NXD-430
• AMX DCS
• AMXmeetingroom
• i!-PCLinkWeb
• MVP-5150
• MVP-5100
• Mio R-3
• Mio R-4
• MXD-500i
• Positrack Kit Software
• VisualArchitect
• EDID Programmer
• NI DeviceController for NI-X000
• RMS Novell GroupWise Plug-in
• RMS Planon Plug-in
• RMS R25 Plug-in
• RMS PeopleCube Resource Scheduler Plug-in
• Autopatch Firmware Upgrade Tool
• NI-700 and NI-900
• NI-3101 Duet Firmware
• NI - X100 NetLinx Integrated Controllers (2100/3100/4100)
• NI DeviceController for NI-700
• NI DeviceController for NI-900
• NXC-ME260/64
• NXV-300
• NXD-430
• NXR-ZGW-PRO
• NXR-ZRP NetLinx Zigbee Pro Repeater
• 12" /15"/17" Modero V-Series and VG-Series Touch Panels
• ScalerOverride

Install this application driver for TPDesign4 and NetLinx Studio for support of direct connection to Modero VG Series panels via USB.

New Features:

• Supports Mio R-4 remotes

Duet is the unique and powerful dual-interpreter environment for programming NetLinx control systems. Program the system in NetLinx or Java or a little of both. Simplify your programming world!

Central Controller firmware 3.41.422 or better is a pre-requisite. For this release, the Device SDK was modified to include the following additional devices:

• Functionality fix for PASSBACK module-level behavior
• Fixed echo-effect on SNAPI commands (e.g: CAMERAPRESETPROPERTIES issue)
• Fixed parsing of Bundle-Version and Duet-Revision

NOTE: You must have the latest firmware versions for your NetLinx masters before you can use the device feature listed above. Versions greater than 387 are recommended. Unpredictable results may occur if your master firmware has not been updated to the proper version.

New Features:

• File transfer support for devices that have STANDBY and AWAKE states (MVP-5200i)

G4 PanelBuilder is a Windows application that offers accelerated development of AMX G4 user interface pages using G4 PanelBuilder Templates (.TPT) available from AMX or designed by the dealer.

New Features: Support for NXD-CV10, NXT-CV10, and NXT-CV10/PB panels.

G4 PanelPreview is a Microsoft Windows application that provides the ability to preview an AMX G4 touch panel interface design on a personal computer.

New Features: Support for NXD-CV10, NXT-CV10, and NXT-CV10/PB panels.

IREdit provides the ability to capture and edit IR hand control files (.IRL, .IRV, or IR information contained within a .IRN database file) for use on Axcess and NetLinx platforms.

New Features: IREdit now includes additional data in the AMX IR database to support IR devices in VisualArchitect. Visual Architect can read the AMX IR database and add IR devices to the list of available devices that can be added to the system. The VisualArchitect data is also updated using the Web Update feature when a new AMX IR database version is released.

AMX is constantly adding IR codes to the database. The database can be updated via AMX IR Update. Within the IREdit application, go to Help > AMX IR Update to launch the IR Update Wizard Dialog.

After a clean installation of IREdit, the IR Database must first be loaded using Web Update.

• Updated application to work with Windows Vista operating system

New Features:

• Corrected the problems with the reported crashes when starting up large NetLinx Studio workspace files and during the "Save and Compile" processes.
• Updating the Device Mapping list (in the Workspace and for Auto-Suggest/Auto-Complete) when saving a source code file.
• Ability to transfer an individual JAR file from the "Other" tab located in the "Add Files" dialog for transfer.
• The IR Data tab is updated properly when adding/removing IRL/IRV files from the Workspace tab.
• Corrected a number of problems within the TELNET windows.
• The "Find" dialog is working in the File Compare utility window.
• Various problems with the "Device Mapping" dialog have been corrected.
• Problems with updating the communication information in the "Master Communications Settings" dialog have been corrected.
• The problem with the correct communication settings selected when starting the "Reboot the Master Controller" dialog has been corrected.

• High Performance updates requiring Firmware 3.41.422 or better
• Functionality fix for PASSBACK module-level behavior
• Fixed echo-effect on SNAPI commands
• Fixed parsing of Bundle-Version and Duet-Revision

• New panel devices:
• NXD-430/435
• TPI-PRO-DVI
• Revised default channel codes (R-4 projects only)
• The default channel codes for R-4 external buttons have been modified to match the corresponding G4 API values (defined in G4API.axi)

• New Setup Pages and System/Advanced Codes:
• MVP-8400/8400i
• NXD/T-CV7
• NXD-700Vi
• NXD/T-CV10
• NXD-1000Vi
• New border styles:
• Mio R-4
• News Header
• Smart Button Squared
• Smart Button Bubbled
• New cursors:
• Mio R-4
• Smart Button Bubbled
• New sliders:
• Mio R-4
• Smart Button Bubbled Large
• Smart Button Bubbled Small
• Updated external button templates:
• Mio R-4
• External button graphic will feature a reduced-scale graphic of the device on the left side of the window, with the design view of the page displayed on the right. This layout will make it easier for the user to select external buttons without scrolling the design view.
• NOTE: After installing the 2.11.20 update, TPDesign4 will require users to perform a Full System Files transfer to install the new border styles for Mio R-4 remotes.

Known Issues:

• Modero-800x480.TP4
• Protected Setup - Missing text in the Telnet/SSH button : The button text is now displayed via variable text at runtime. The text will be restored to the button in a future release.

VisualArchitect is a comprehensive system design platform that increases the productivity and efficiency of your organization. VisualArchitect simplifies generation of all the programming, touch panel files, IR codes and system documentation for an integrated control system. This software is free to Authorized AMX Dealers and Independent Programmers and is available thru your AMX sales representative. For Domestic Dealers, place an order for NSS-VA, FG3002-21, to receive a CD with MSRP pricing in U.S. dollars. International dealers should order NSS-VA-INTL, FG3002-21INTL, and contact your regional distributor for the MSRP pricing file in your local currency.

New Features:

• Support for DVX-2100HD Total Environment Controller
• Support for HPX-1600 HydraPort Retractable Connection Port
• "Uncontrolled Device" for representing A/V devices such as PCs, speakers, etc.
• System Diagram enhancements:
• Roll-up element nodes to just their title bar
• Display connections as curves
• Element node title icons for install notes and user comments

Known Issues:

Any change of a Novara 3000 series controller's "RMS Peer Group" or "Device Name" requires restarting the RMS proxy application.

If the IP address of a keypad that was previously connected to the RMS proxy is changed it is best to restart the RMS proxy application. If the proxy is not restarted, the RMS proxy will pick up the change but it will continually attempt to connect to the keypad's previous IP address.

If a controller is added in RMS and the "device name" is changed on the keypad to display updated information regarding the "device name" the room should be deleted and re-added.

Multi-language support has passed limited testing. English has been thoroughly tested.

Please see the manual for specific information about the languages and platforms that have been tested with the RMS proxy.

AMXmeetingroom has been modified with the following features:

• 800x600 format
• Added support for Lightec lighting system
• Added support for video sync sensor or power sensor for IR devices through I/O port
• Added support for modifying RGB values for chameleon colors
• Enhanced configuration to be more user-friendly
• Fixed speed of DVX configuration pages
• Fixed IR pulse time assignments - assignments were not saved after pressing Next button
• Fixed text on Activation page pop up
• Fixed Configuring Display 1 message when searching for Duet modules
• BACK button now saves changes made
• Fixed TV/DSS Favorites Server issues
• When using an MVP panel, disabled ability to select Touch Panel for preview
• Added UP and DOWN buttons to System Preview page

Prerequisites:

• All panels require a minimum of 128 Mb RAM
• Supported masters include
• NI-2100 (firmware v3.41.422 or greater)
• NI-3100 (firmware v3.41.422 or greater)
• NI-3101-SIG (firmware v3.41.422 or greater)
• NI-4100 (firmware v3.41.422 or greater)
• DVX-2100HD (firmware v3.51.339 or greater)

Firmware Revision History:

• Initial release for 800 x 480 resolution panels

Known Issues:

• Any touch panel used with AMXmeetingroom must have a minimum of 128 Mb RAM
• There are new FG numbers for 7 and 10 inch panels that are supported in AMXmeetingroom
• png logo files with 8 bit RGB color do not load on MVP wireless panels - use 8 bit indexed color instead

Programming Information:

• This is the 800 x 480 panel file relaese for AMXmeetingroom
• Use with matching token file (v1.0.1)

Maintenance release addresses several cosmetic issues. This release also includes v2.1.16 fixes and features.

Please see release notes for more information.

Please see release notes for more information.

Note: External Scheduling Interfaces were removed from the installer. All scheduling plug-ins must be ordered from AMX and installed along with RMS version 3.3 or greater. For more information please visit the AMX Enterprise applications product page at: www.amx.com/products/categoryEnterpriseTools.asp.

New Features:

• Added support for RMS Interface for Exchange/Outlook Organizational Form
• Added user modifiable time zones
• Added auto refresh feature on System Status and View Device pages
• Added limited support for multiple bulb projectors
• Added new RMS IT, Database, and FAQ documentation
• Updated RMS Configuration Wizard
• Removed External Scheduling Plug-ins from RMS Server installation
• Created separate External Scheduling Plug-in installation packages for Exchange, Lotus Notes, GroupWise, Planon, R25, EMS, and PeopleCube
• For a full listing of bug fixes, please refer to the README.HTM file

New Features:

• Added - RMSEngine command to change TELNET or HTTP default ports
• Added - support in RMSProjectorMod to listen for Duet LAMPTIME feedback command
• Added - support in RMSModuleBase to listen for Duet channel DATA_INITIALIZED (ch 252) for device communicating parameter status
• Added - support in RMSTransportMod to listen for Duet device transport feedback
• Added - support for NI-3101-SIG

Note: This version of RMS CodeCrafter (v3.2 Build 22) requires RMS SDK v3.3.33 or later.

New Features:

• Updated application to work with Windows Vista operating system

All RMS scheduling plug-ins must be ordered from AMX and installed along with RMS version 3.3 or greater. For more information please visit www.amx.com/rms.

• Requirements
• RMS Server version 3.3 or later.
• The Planon software needs to be version FO-SE 4.33 matchcode h.
• Features
• Fixed the bug that causing the Plugin to generate duplicate appointments in RMS during trolling cycles.
• Known Issues
• Recurring event instances in Resource Scheduler are handled as individual appointment reservations in RMS.

All RMS scheduling plug-ins must be ordered from AMX and installed along with RMS version 3.3 or greater. For more information please visit www.amx.com/rms.

• Requirements
• RMS Server version 3.3 or later.
• PeopleCube Resource Scheduler version 8.5 SP2 or later.
• Features
• Initial release of RMS Resource Scheduler Plug-in.
• Supports event synchronization between PeopleCube Resource Scheduler and AMX RMS.
• Supports events added, extended, and ended by users from a RMS touch panel.
• Known Issues
• Recurring event instances in Resource Scheduler are handled as individual appointment reservations in RMS.

All RMS scheduling plug-ins must be ordered from AMX and installed along with RMS version 3.3 or greater. For more information please visit www.amx.com/rms.

• Requirements
• RMS Server version 3.3 or later.
• NovellGroupWise 5 or greater.

All RMS scheduling plug-ins must be ordered from AMX and installed along with RMS version 3.3 or greater. For more information please visit www.amx.com/rms.

• Requirements
• RMS Server version 3.3 or later.
• CollegeNET API version 1.8 or later.
• Features
• Initial Release
• Known Issues
• Recurring event instances in R25 are handled as individual appointment reservations in RMS.
• RMS does not obtain the organizer email address from R25 events and thus cannot deliver email notifications to the R25 event organizer.
• When events reservations are modified in R25, R25 internally creates new reservation booking records with new events reservation identifiers, thus RMS detects these as new event reservations and then deletes the previous event reservation from the RMS database. Consequently, this also deletes any RMS associated data configured on the previous event reservation record.
• Reservations that are Ended or Extended from the RMS touch panel are handled as modified R25 events and thus exhibits the same behavior as outline in #3 above.
• R25 does not support modifying start and end times on individual recurring event instances, thus RMS cannot extend or end recurring event instances.
• R25 does not support modifying start and end times on event that contain multiple reservations, thus RMS cannot extend or end multiple reservation event instances.

AMX Device Configuration Software Release for:

• DCS Device Manager Library
• New AscII to Hex tool form
• Enova AVX-400-SP
• DCS enova has updated AVX-400 graphical user interface
• DCS enova shall be able to program device even when the "Display Control" in the Display tab GUI is disabled
• Novara CP3000 Initial Release

The Certificate Upload Utility gives you the ability to compile a list of target touch panels, select a pre-obtained certificate (uniquely identifying the panel), and then upload that file to the selected panel.

This application ensures that a unique certificate is securely uploaded to a specific touch panel. Currently, the target panels must be capable of supporting the WPA-PSK and EAP-XXX wireless security formats.

New Features:

• Corrected the IP Address edit field to support localization capabilities

New Features:

• Metreau Audio Keypads and the DAS-SIRIUS Sirius Tuner Module have been added as devices and can be programmed using AMX DAS Programmer v7.05 with either a Tango or Mi Series Controller.

The Novara DCS software application allows the ControlPad to perform various functions, such as RS-232/IR and relay control, button feedback, delay time, and time out.

New Features:

• Enhanced IRL file importing
• Modified file filtering to convert Sony IR files

The Novara DCS software application allows the ControlPad to perform various functions, such as RS-232/IR and relay control, button feedback, delay time, and time out. Europe version allows configuration of CP-1000 and CP-2000 Series Novara ControlPads.

Remote management software for use with IP Control Units. Server-based web-enabled version which provides Novara CP2000 connectivity into RMS.

New Features:
This version now checks that the individual devices are communicating and reports it to RMS as "Device Online/Offline" depending on status. Reports Lamp Hours and Alarms.

Initial release after conversion from ProCon Device Manager

This user friendly graphical control program provides a variety of options including executing and disconnecting switches, defining and executing macros, and scheduling.

APControl 3.0.1 can be customized to fit the needs of your installation. Simply create CrossBar views for different Virtual Matrix configurations within the same system, then change background colors, and add custom text and icons as desired.

Changes in this release:

• Added support for Epica DGX 32 products
• Added support for Epica DGX 144 SC Fiber Input and Output boards

• Changed the default download/install directory from WINDOWS\SYSTEM32\UPDATES to the user's temporary directory
• Updated the User Interface for ease of use