• 9.0" color active - matrix TFT with 16x9 aspect ratio
• Screen Resolution – 800x480
• Display Colors – 24-bit color depth
• Brightness – 400 nits
• LED backlit display
• Supports full motion JPEG providing at least 24 frames per second
• IPS Technology enables wide viewing angles - 85 degrees in all directions
• Contrast Ratio – 900:1
• Built-in speaker and microphone
• 256 MB mobile DDR SDRAM/2GB SD Flash with 1.1GB of useable space
• USB port and mini-SD card slot for file transfer and photo uploads
• Capacitive navigation pad with up/down/right/left/select
• 4 user-programmable capacitive buttons with on-screen fly out labels
• Supports landscape or portrait mode
• Integrated kickstand and stylus
• Available in black or white
• Versatile placement options including table and wall charging stations or integrated kickstand
• Works with AMXmeetingroom, VisualArchitect and AMXhome

SPECIFICATIONS

DIMENSIONS (HWD)
7 5/8" x 11" x 1 1/16" (19.4 cm x 27.9 cm x 2.7 cm)

WEIGHT
3.60 lbs (1.63 kg)

POWER REQUIREMENTS (WITHOUT CHARGING)
Panel with battery fully charged or with no battery:

• Constant current draw: 1.1 A @ 12 VDC
• Startup current draw: 1.2 A @ 12 VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures

POWER REQUIREMENTS (WHILE CHARGING)
Panel while charging battery:

• Constant current draw: 2.0 A @ 12 VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures

MINIMUM POWER SUPPLY REQUIRED

• PS3.0 Power Supply (FG423-30)
• PS-POE-AT High Power PoE Injector (FG423-81) through the Table Docking Station and Wall Docking Station (included with docking stations)

POWER MODES

• ON: All necessary modules are powered up and device remains online with the Netlinx Master
• ASLEEP: Only the backlight will be turned off after the user selectable time of inactivity has elapsed. Panel resumes the ON mode in ~ 1 second
• STANDBY: Power to all components other than the touch screen is turned off after the user selectable time of inactivity has elapsed. Device will turn back on by touching the screen
• SHUTDOWN: Power to all peripherals and components is turned off. The system remains in this mode until it is rebooted

BATTERY DURATION

• Five hours of continuous use
• Three days standby time

MEMORY
2GB internal microSD (1.1GB accessible to user)

SCREEN PROPERTIES

• Screen resolution: 800 x 480 pixels (HV) @ 60 Hz refresh rate
• Aspect ratio: 16 x 9
• Brightness (luminance): 400 cd/m2
• Channel transparency: 8-bit Alpha blending
• Contrast ratio: 900:1 max.
• Display colors: 16.7M colors (8-bit color depth)
• Dot/pixel pitch: 0.246 mm
• Panel type: TFT Color Active-Matrix

ACTIVE SCREEN AREA

• 7 3/4" x 4 1/2" (19.7 cm x 11.8 cm)
• 9" (diagonal)

VIEWING ANGLE
Up/Down/Left/Right: 85/85/85/85

AUDIO
Mono speaker: 4 Ohm, 2 Watts 300Hz cutoff frequency

INFRARED COMMUNICATION
IR Transmit only, including AMX 38KHz, AMX 455KHz, and 3rd party IR

OPERATION/STORAGE ENVIRONMENTAL

• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Battery Charging Temperature: 0° C (32° F) to 30° C (86° F)
• Operating & Battery Charging Humidity: 20% to 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% to 85% RH

INCLUDED ACCESSORIES

• PS 3.0 Power Supply (FG423-30)
• Stylus (pre-installed onto the left side of the unit)

Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

• Getting Started with the MVP-9000i Touch Panel
• Getting Started with Intercom Enabled Touch Panels (Online)
• TPD4 Tutorial (Online)
• TPD4 UI Design
• Configuring Touch Panel Transitions and Gestures
• Control Designer
• Quest for Power (Online)
• Control Installer

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.