AVS-ENOVADGX32-VO-DXLINK

Enova® DGX DXLink™ Twisted Pair Output Board

DescriptionEnova DGX DXLink Output Board
Part #FG1058-580
Analog & Digital | Digital
Video • Audio

HELPFUL HINT
InstaGate Pro provides for true, non-limited matrix switching from any HDCP source device to any or all connected destination devices

WATCH THE VIDEO
Get an inside look at the features and technical capabilities of the all new Enova DGX family of Digital Media Switchers that include an integrated NetLinx Controller, embedded Ethernet switch, and can be populated with Enova DGX video input and output boards in addition to optional audio insert/extract boards.

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with Enova DGX (Online)
  • Enova Solutions Design & Implementation (Classroom Course)

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

SPOTLIGHT: Enova
A new, innovative philosophy on how you think about A/V technology: Enova is part of an evolution to collaborate, communicate and educate using AV technology. Visit www.amx.com/enova/ to learn more.

AWARD WINNING PRODUCTS

Best New Product at InfoComm 2011: AMX's Enova DGX
The Enova converts analog and digital video and control, which runs through a 16x16 or 32x32 Enova Digital Media Switcher. The switcher also includes a gigabit Ethernet switch that's fully integrated. You get digital media, control and data on a single Cat5 cable. Here's the rAVe NOW video we shot at InfoComm.

InstaGate Pro™ Technology

No tools, no delays and no key constraints. AMX's exclusive InstaGate Pro Technology allows traditionally key limited sources to be freely switched to any display without the typical HDCP delays.

OVERVIEW
The AVS-ENOVADGX32-VO-DXLINK is a HDCP compliant twisted pair cable output board for the Enova DGX 16 and Enova DGX 32. It has four connections per DXLink output board and is designed to transmit audio and video to DXLink Receivers while passing bi-directional control and Ethernet signals over one standard twisted pair cable up to 100m. DXLink Power is available from the DXLink Output Board to power DXLink Receivers.

COMMON APPLICATIONS
The Enova DGX DXLink Twisted Pair Output Board is ideal for applications where destination devices are located up to 100 meters away from the Enova DGX Digital Media Switcher and need to be distributed throughout a commercial or residential environment.

FEATURES

  • Only One Cable – Send audio and video while passing control and Ethernet signals and power over one twisted pair cable
  • Send HDMI signals up to 100 meters – Extend the reach of the HDMI with HDCP signals far beyond the capabilities of typical HDMI cabling
  • Standard Twisted Pair Cable – Save time and effort in installation by leveraging pre-existing cost effective twisted pair cable
  • Hot Swappable – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards
  • HDCP Compliant

  • Powered Remote Receivers - Power is available from the DXLink Output Board to power DXLink Receivers
  • 3D Support* Coming Soon - Pass through latest video formats including 3D and Deep Color
  • Surround Sound Support Coming Soon - Pass through high definition surround sound including DTS-HD and Dolby TrueHD

*When used with DXLink Output Boards and DXLink HDMI RX Scaler is in bypass mode

SPECIFICATIONS

Signal Transport – DXLink w/HDCP
Compatible Formats:
HDMI Video / Audio / Ethernet / USB (HID) / Power and Control
Signal Type Support:
DXLink
DXLink Power:
DxLink RX units can have power supplied over twisted pair cable when connected to a DXLink Output Board of the Enova DGX 16/32 Digital Media Switcher

Use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of a configuration and whether any of the DXLink Transmitters or Receivers should be powered with the local power supply. The configuration tool contains instructions on how to determine power requirements
Connectors:
(4) RJ-45 Ports
Transport Layer Throughput (Max):
10.2 Gbps
Twisted Pair Cable Type:
Cat5e, Cat6/6e, Cat6a, Cat7 of UTP, SF/UTP, S/FTP, and F/UTP varieties*
Twisted Pair Cable Length:
Up to 328 ft (100 m)*
Video Data Rate (Max):
4.95 Gbps / 6.75 Gbps^
Video Pixel Clock (Max):
165 MHz / 225 MHz^
Progressive Resolution Support:
480p up to 1920x1200 @ 60 Hz
Interlaced Resolution Support:
480i, 576i, 1080i
Deep Color Support:
24-bit, 30-bit^, 36-bit^
Color Space Support:
RGB 4:4:4
YCbCr 4:4:4 and 4:2:2

Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
3D Format Support:
Yes (HDMI Primary Formats, when used with DXLink Output Boards and the DXLink HDMI RX Scaler is in bypass mode)
Frame Packing 1080p up to 24Hz
Frame Packing 720p up to 50/60Hz
Frame Packing 1080i up to 50/60Hz
Top-Bottom 1080p up to 24Hz
Top-Bottom 720p up to 50/60Hz
Side-by-Side Half 1080p up to 50/60Hz
Side-by-Side Half 720p up to 50/60Hz
Audio Format Support:
Dolby TrueHD, Dolby Digital**, DTS-HD Master Audio, DTS**, 2 CH through 8 CH L-PCM
Audio Resolution:
16 bit to 24 bit
Audio Sample Rate:
32 kHz, 44.1 kHz, 48 kHz, 96 kHz**, 192kHz**
Local Audio Support:
Yes, Insertion and/or Extraction of 2 CH L-PCM selectable by channel when used in conjunction with Enova DGX Audio Insert / Extract Board
HDCP Support:
Yes, full matrix HDCP support (includes any input to any or all outputs)
Key Management System
AMX HDCP InstaGate Pro Technology
Key support up to 16 devices per output, independent of source device
CEC Support:
None
ICSP, TCP/IP, USB, IR, Control Management:
Control distribution is managed by the Enova DGX 16/32 Digital Media Switcher on-board NetLinx Master and Ethernet Switch
Approvals:
CE, FCC Class A, UL, cUL, RoHS / WEEE compliant


* Cable quality required in order to meet 100 meter distance should meet ANSI/TIA/EIA 568A-5 or better specification and be rated for 250 MHz or better. If running Cat5e or Cat6 cables together in a bundle, they can only be coupled for a distance of up to 60m before they must be separated over the remainder of the run. Cat6a and Cat7, which are shielded by definition, can be bundled for the entire 100m run. For cable runs approaching the 100m limit, Cat6/6e, Cat6a or Cat7 is recommended. It is recommended that the cabling between AMX systems/devices be a uniform run of solid core cabling with no patch cables or extensions. If a patch cable is required (for example, between a patch panel and an AMX device), the patch cable should be limited to 5 m total on each end. Best results have been seen using a Cat6 coupling device for attaching the cables together even when using lower rated Cat5e cabling. Important Notice: DXLink twisted pair cable runs for DXLink equipment should only be run within a common building

** Dolby Digital and DTS support up to 48kHz, 5.1 channels

^ Only supported when the HDMI Output Board Scaler or DXLink HDMI RX Scaler is in bypass mode and format is 1080p60 or less



Note: Specifications are subject to change.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with Enova DGX (Online)
  • Enova Solutions Design & Implementation (Classroom Course)

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

NAME DESCRIPTION PART #
AVB-RX-DXLINK-HDMI DXLink HDMI Receiver Module (FG1010-500)